Drainage Pump as a drainage device, you may encounter some common problems in daily use. The following are some of the common problems and solutions.
1. Poor drainage: If the drainage pump does not drain smoothly, first check whether the drain is blocked and clean up the blockage. In addition, it is also necessary to ensure that the filter of the drainage pump is not blocked. Regular cleaning of the filter is the key to keeping the drainage unblocked.
2. Excessive noise: Excessive noise generated by the drainage pump during operation may be caused by wear of mechanical parts or unstable installation. At this time, it is necessary to check whether the mechanical parts need to be replaced or repaired in time, and reinstall the drainage pump to ensure stability.
3. The pump cannot be started: If the drain pump cannot be started, it may be caused by a power failure, poor wire contact, or damage to the motor. Check whether the power supply is normal and whether the wires are in good contact. If there is no abnormality, it is recommended to contact the maintenance personnel for maintenance.
4. Water leakage phenomenon: If the drainage pump is found to be leaking, it may be caused by aging or damage to the sealing ring. At this time, it is necessary to replace the sealing ring or contact professionals for repair.
By understanding and solving these common problems, users can better maintain and use Drainage Pump to ensure its drainage effect and service life. At the same time, in the process of using the drainage pump, we should also pay attention to regular maintenance and maintenance to extend the service life of the drainage pump.